Fluorosurfactant for fire fighting foams
Please Enter Product Name
Our Products
Contact Us
HC-160 is a fluoro polymer compound that can extinguish solvent fires. It is a reinforced anionic low molecular weight fluorinated polymer with an active content of 35% and is miscible with water in any ratio.
HC-160 can lower the surface tension of aqueous solutions. HC-160 is soluble in fresh water and sea water. However, it is insoluble in organic solvents and has hydrophilic and oil repellent functions, especially insoluble in polar solvents such as ethanol, acetone, etc. HC-160 can be mixed with anionic, amphoteric and cationic surfactants. There is no need to add any polysaccharides by using HC-160. HC-160 has been especially designed to be used in both synthetic and protein-based, film-forming fire fighting foam agents, such as AFFF, AR-AFFF, FFFP and AR-FFFP.
Typical Properties:
| Appearance: | Clear, amber-colored liquid |
| Ionic Character: | Anionic |
| Actives: | 30% |
| Density: | 1.03-1.10g/ml (@25℃) |
| Flammability: | Non-Flammable |
| pH: | 5.0-7.5 |
| Solubility: | HC-157 can be diluted directly with water |
| Stability: | At least two years if stored in original containers at temperatures not exceeding 55℃ |
| Storage Stability: | HC-160 should be stored at temperatures above 0℃. If frozen or a solid phase separates out of the product, warm the product to roomtemperature and mix it well before use. Freezing and thawing will not affect the properties of the product or its performance. |
Product Safety:
HC-160, a C6 fluorotelomer surfactant, cannot degrade into PFOS or PFOA.
HC-160 is not an irritant on skin.
It is a minimal irritant on eyes.
Precautions and First Aid:
HC-160 should be handled with good industrial precautions. Safety goggles and rubber gloves, as well as protective clothing suitable to avoid skin contact should be worn. In case of contact with eyes, flush eyes with plenty of water and consult a physician. In case of skin contact, wash skin with plenty of water and soap.
Notice:
All statements, technical information and recommendations contained herein are based on information and tests we believe to be reliable. The accuracy or completeness thereof is not guaranteed. Since conditions of use are outside our control, the purchaser should determine the suitability of the product for his intended use and assumes all risk and liability in connection therewith.
